Gabion wire diameter

Low carbon steel wire gabion consists of high resistance to corrosion, high strength, ductility or PVC coated wire above the use of machinery woven, box type structure by using the network that is made of stone cage. According to ASTM and EN specifications, the diameter of low carbon steel wire used is different according to the requirements of engineering planning. Typically between 2.0-4.0mm, the tensile strength of gabion wire not less than 38kg/m2, the metal coating component is usually higher than 245g/m2, stone cage mesh line of marginal diameter is usually greater than the wire diameter. The length of the double twisted part shall not be less than 50mm. To ensure that the metal coating and PVC coating of the twisted steel wire are not damaged.

1. galvanized zinc: the amount of zinc is 10g/m2. Poor anticorrosion

2. hot-dip galvanizing: the amount of zinc can reach 300g/m2. Strong corrosion resistance

3. Galvan (Zinc-Aluminum Alloy): It is divided into two kinds of raw materials, namely, Zinc-5% Aluminum-Mixed Rare Earth Alloy Steel Wire and Zinc-10% Aluminum-Mixed Rare Earth Alloy Steel Wire. Super corrosion resistance

4.PVC plastic wrap. It is to wrap a layer of PVC or PE on the outside of the wire. The thickness of the wrapping is usually 1.0mm, for example, 3.7mm after wrapping 2.7mm. Anticorrosion
(5) septum: according to the planning drawings, each meter and a piece of film should be added in the direction of the cage length.
(6) scale: Customizing or customizing stock.
(7) the scale of diameter and diameter.